Blow Molding Film Cleanroom

Blow Molding Film Cleanroom

Purification workshop is purification plant wall, top plate is generally more than 50mm thick sandwich color steel plate manufacturing, its characteristics are beautiful, rigid, good insulation performance, easy construction. Rounded corners, doors, window frames and other general use of special aluminum oxide profiles manufactured ground can be used epoxy self-flow flooring or senior wear-resistant plastic flooring, anti-static requirements, anti-static type can be used. Supply and return air ducts made of hot duct zinc plate, paste purification and good insulation effect of flame retardant P ...

Blow Molding Film Cleanroom


Purification workshop is purification plant wall, top plate is generally more than 50mm thick sandwich color steel plate manufacturing, its characteristics are beautiful, rigid, good insulation performance, easy construction. Rounded corners, doors, window frames and other general use of special aluminum oxide profiles manufactured ground can be used epoxy self-flow flooring or senior wear-resistant plastic flooring, anti-static requirements, anti-static type can be used. Supply and return air ducts made of hot duct zinc plate, paste purification and good insulation effect of flame retardant PF foam plastic plate efficient air outlet with stainless steel frame, beautiful and clean, perforated mesh plate with baking paint aluminum plate.


Cleanroom Classifications:Blow Molding Film Cleanroom


Plastic film purification plant includes blow molding, injection molding, blister molding, extrusion, film and other plastic molding industries. Such workshops in addition to achieving dust-free, but also workshop to maintain a good working environment, while the odor treatment, exhaust gas emissions to deal with environmental protection and other issues.


Project Introduction


100,000 grade blown film and laminated film workshop purification project

Clean area: 4200㎡ (sqm)


Participate in the whole process from the design and construction of the plant, pre-layout Design the production equipment and the water, electricity and gas required for the process future supporting equipment and piping needs, to ensure that the later clean plant installation process can be achieved quickly and precisely with the With professional professional perspective, professional design in advance to do a good design plan, so as to reduce the shorten the construction period and the waste of resources caused by repeated transformation.


Blow Molding Film Cleanroom

Blow Molding Film Cleanroom

Blow Molding Film Cleanroom

Blow Molding Film Cleanroom


Cleanroom Classifications


Clean rooms are classified according to the cleanliness level of the air inside the controlled environment. The clean room class is the level of cleanliness the room complies with, according to the quantity and size of particles per cubic meters of air. The primary authority in the US and Canada is the ISO classification system ISO 14644-1.


This ISO standard includes these clean room classes : ISO 1, ISO 2, ISO 3, ISO 4, ISO 5, ISO 6, ISO 7, ISO 8 and ISO 9. ISO 1 is the “cleanest” class and ISO 9 is the “dirtiest” class. Even if it’s classified as the “dirtiest” class, the ISO 9 clean room environment is cleaner than a regular room.


The most common ISO clean room classes are ISO 7 and ISO 8. The Federal Standard 209 ( FS 209E ) equivalent for these ISO classes are Class 10,000 and Class 100 000.


The old Federal Standard 209E ( FS 209E ) includes these clean room classes : Class 100,000; Class 10,000; Class 1,000; Class 100; Class 10; Class 1. This standard was replaced in 1999 by ISO-14644-1. It was withdrawn in 2001, but it is still widely used.


Clean rooms must also follow industry-specific and international standards. For example, EU GMP (A-B-C-D), applies to pharmaceutical products and USP (795, 797 and 800) to compounding pharmacies.


The GMP workshop is the special designed fully enclosed dust free room. It can not only remove the pollutants such as particle, harmful gas and bacterium but also control the temperature, cleanliness, pressure, air flow velocity and distribution, noise, vibration, illumination and static electricity to the needed level. No matter how the outer environment changes, the interior of the plant can still keep the characteristics meeting the original demands. Then, the product can be manufactured in a good environment.


You might also like  —>Pharmacy CleanroomMicroelectronics CleanroomFood Germ-Free CleanroomHospital CleanroomPrinting Packaging CleanroomBlow Molding Film Cleanroom


BLOW MOLDING FILM PURIFICATION WORKSHOP

BLOW MOLDING FILM PURIFICATION WORKSHOP

BLOW MOLDING FILM PURIFICATION WORKSHOP

BLOW MOLDING FILM PURIFICATION WORKSHOP

BLOW MOLDING FILM PURIFICATION WORKSHOP

BLOW MOLDING FILM PURIFICATION WORKSHOP

BLOW MOLDING FILM PURIFICATION WORKSHOP

BLOW MOLDING FILM PURIFICATION WORKSHOP

BLOW MOLDING FILM PURIFICATION WORKSHOP



Send Inquiry to us!

ARE YOU READY FOR AWESOMENESS? CONTACT US NOW!

CONTACT NOW

cache
Processed in 0.005401 Second.