Q: What Is a Cleanroom?
A: A cleanroom (or clean room) is a room that has HEPA filtration to remove particles from the air. Cleanrooms are used for manufacturing where high levels of cleanliness and sterility are required. Common applications are medical devices, pharmaceutical and semiconductor manufacturing. The FDA mandates the use of cleanrooms to create GMP manufacturing factories.Pharmacy Cleanroom
Q: What Are Cleanrooms Used For?
A: Cleanrooms are used for manufacturing where high levels of cleanliness and sterility are required. Common applications are medical devices, pharmaceutical and semiconductor manufacturing. Cleanrooms use HEPA filters to remove particles from the air.Microelectronics Cleanroom
Q: How Clean Is a Cleanroom?
A: Very clean. A class 100 cleanroom has 100 particles per cubic foot. By comparison your typical office space has between 500,000 and 1 million particles per cubic foot. Cleanrooms come in different classes from class 100 to 100,000.Food Germ-Free Cleanroom
Q: When Is a Cleanroom Required?
A: Medical device and pharmaceutical manufacturing requires sterile environments to produce their products. Cleanrooms provide this sterile super clean manufacturing space which reduces the chance of contamination getting in your medicine. Semiconductor manufacturers produce devices with ultra small super dense features. Examples are computer chips for your cell phone or PC. If contamination were to get on the chip during manufacturing, they would not work.Hospital Cleanroom
What Are the Do and Don’ts in a Cleanroom?
Do:
Do wipe down all surfaces on a regular basis to remove contamination.
Do make sure doors are always closed to maintain positive pressure.
Do always have all staff were cleanroom suits over their street clothes to prevent bringing contamination into the cleanroom.Printing Packaging Cleanroom
Don't
Don’t eat or drink in your cleanroom.
Don’t bring dirty equipment or material into cleanroom – always wipe it down before bringing it in.
Don’t turn off the HEPA fan filter units – it will take several hours after you turn them back on before the cleanroom is clean again.Blow Molding Film Cleanroom