Open Online Consultation

Everything You Need to Know about Cleanroom Pass-Box

As an auxiliary equipment of the cleanroom, the pass box is mainly used for the transfer of small items between the clean area and the clean area, and between the non-clean area and the clean area to reduce the number of door openings in the cleanroom and minimize the clean area Pollution. 

Everything You Need to Know about Cleanroom Pass-Box

The passbox is widely used in micro-technology, biological laboratories, pharmaceutical factories, hospitals, food processing industries, LCDs, electronics factories and other places that require air purification.


The pass box is divided into three categories: 1. Electronic interlocking pass box 2. Mechanical interlocking pass box 3. Self-cleaning pass box.


In addition, pass box can be divided into air shower pass box, ordinary pass box and laminar flow pass box according to the working principle. Various models of pass box can be made according to actual requirements. 


A cleanroom refers to the removal of particulates, harmful air, bacteria and other pollutants in the air within a certain space, and the indoor temperature, cleanliness, indoor pressure, air velocity and air distribution, noise, vibration, lighting, and static electricity are controlled within a certain range. The room is specially designed within the scope of demand. That is, no matter how the external air conditions change, the room can maintain the original set requirements of cleanliness, temperature, humidity, and pressure.


The main function of the cleanroom is to control the cleanliness, temperature and humidity of the atmosphere that the products (such as silicon chips, etc.) are in contact with, so that the products can be produced and manufactured in a good environmental space. 


This space is called a cleanroom. According to international practice, the level of dust-free purification is mainly based on the number of particles per cubic meter of air whose diameter is larger than the classification standard. In other words, the so-called dust-free is not 100% without a little dust, but controlled in a very small unit. 


Of course, the particles that meet the dust standard in this standard are very small compared to our common dust, but for the optical structure, even a small amount of dust will have a very large negative impact, so in the production of optical structure products , Dust-free is an inevitable requirement.


The number of fine dusts with a particle size of less than 0.3 microns per cubic meter is controlled below 3,500, which reaches the A-level of the international dust-free standard. The dust-free standard of chip-level production and processing has higher requirements for dust than A-level. Such high standards are mainly applied to the production of some higher-level chips. 


The amount of fine dust of 0.5uM and below is strictly controlled within 1,000 per cubic inch, which is the 1K level commonly known in the industry. Empty state: a cleanroom (facility) that has been constructed and can be put into use. It has all related services and functions. However, there are no equipment operated by operators in the facility.


Static Pass Box : A cleanroom (facility) with various functions complete, properly set and installed, and can be used or in use as set, but there are no operators in the facility.


Dynamic Pass Box: in a cleanroom in normal use, with perfect service functions, equipment and personnel; if necessary, normal work can be performed.

★ Related Articles:
★ You might be interested:
cache
Processed in 0.005638 Second.